Radon Mitigation System Cost: Testing and Fixing

Radon mitigation system cost is usually about $1,200 to $2,000 for the most common setup, a sub-slab depressurization system, with HomeGuide’s national average at $1,600 and Angi’s at $1,030. Testing comes first and costs little: $10 to $30 for a DIY kit or $125 to $400 for a professional test (HomeGuide). The EPA says to fix your home if radon is 4 picocuries per liter (pCi/L) or higher, and to consider fixing it between 2 and 4. This guide walks through test, result and action, prices each mitigation method, and includes a calculator.

The short answer

  • System: $1,200 to $2,000 for sub-slab depressurization; average $1,600 (HomeGuide) or $1,030 (Angi).
  • Testing: $10 to $30 for a DIY kit, $125 to $400 for a professional test (HomeGuide).
  • Action level: fix the home at 4 pCi/L or higher; consider fixing between 2 and 4 pCi/L (EPA).
  • Running cost: about $70 to $80 a year for the fan (HomeGuide); Angi says $30 to $300.

Radon mitigation system cost calculator

Method and testing prices come from HomeGuide. If you don’t know which method your house needs, start with sub-slab depressurization, the most common one, and let a certified contractor confirm it. A rough estimate, not a quote.

Mitigation system
First test
Follow-up test
Fan electricity

Not included: crack sealing, electrical work, a fan replacement after 5 to 10 years, larger homes or local price differences. Rounded to the nearest $10.

Empty basement with concrete walls where a radon mitigation system could be installed
The CDC says radon can enter homes through small cracks or holes, which is why most systems pull air from under the basement slab. Photo: Curtis Adams / Pexels.

Test first, then compare radon mitigation system cost

  1. Test. The CDC says testing is the only way to know your radon level. Kits are sold by state radon offices, hardware stores and online for about $10 to $30 (HomeGuide); some states give short-term kits away.
  2. Read the result. The EPA recommends fixing your home if radon is 4 pCi/L or higher, according to the CDC. The EPA also recommends considering a fix between 2 and 4 pCi/L and says there is no known safe level of radon. The CDC adds that lowering radon reduces lung cancer risk even below 4.
  3. Hire a qualified contractor. The CDC says your state radon office can help you find a qualified or state-certified radon contractor, and that you should rely only on a qualified professional for the repair.
  4. Retest. The CDC advises testing again after the work to make sure it lowered the level. HomeGuide suggests checking that the estimate includes follow-up testing.

The CDC, citing the EPA and the Surgeon General, says radon causes more than 21,000 lung cancer deaths a year in the United States, making it the second leading cause after smoking.

Radon mitigation system cost by method

$0 $2.5k $5k $7.5k $10k Drain-tile suction Sump pit sealing Sub-slab depressurization Block-wall depressurization Crawl space membrane Bar = typical range · dot = average
Source: HomeGuide radon mitigation cost guide. Read on November 16, 2026.
MethodHomeGuideAngi
Active soil (sub-slab) depressurization$1,200 to $2,000; $2,500+ for large homes$1,000 to $3,000
Passive depressurization—$500 to $2,500
Block-wall or wall-based systems$1,800 to $3,000$500 to $3,000
Ventilation (HRV or ERV)$1,300 to $2,500$1,300 to $2,500
Sealing the basement$4,500 to $15,000$400 to $4,600
Radon in well water$1,200 to $1,800 (carbon); $4,000 to $5,000 (aeration)$1,200 to $5,000

How the foundation changes the radon mitigation system cost

A basement or slab-on-grade home usually gets sub-slab depressurization: a pipe through the slab and a fan that pulls soil gas out and vents it outside. Homes with hollow block walls may need block-wall depressurization ($1,800 to $3,000, HomeGuide). Crawl spaces are the most expensive, because a plastic membrane goes over the ground first: HomeGuide gives $3,000 to $8,000, and Angi $1,500 to $15,000 for encapsulation.

Building exterior with pipes running up the wall
A mitigation fan uses about as much electricity as a 60-watt bulb, roughly $70 to $80 a year (HomeGuide). Photo: Tima Miroshnichenko / Pexels.

What a radon test costs

TestCostSource
DIY test kit$10 to $30 (some states free)HomeGuide
Digital radon monitor$150 to $300HomeGuide
Professional radon test$125 to $400HomeGuide
Radon inspection$150 to $800Angi

Yearly running cost of a radon mitigation system

HomeGuide says the fan costs about $70 to $80 a year in electricity, about as much as a 60-watt bulb. Angi gives a wider $30 to $300, depending on fan size. Fans usually last 5 to 10 years, and HomeGuide says most manufacturers offer a 5-year warranty. Angi says a new loud or humming noise can be a sign the fan needs replacing.

Safety notes

  • Angi doesn't recommend installing a system yourself, and notes that the electrical work may need a licensed electrician.
  • The CDC says lowering high radon levels requires technical knowledge and special skills. Use a qualified or state-certified radon contractor.
  • Retest after the work to confirm the level dropped, as the CDC advises.

Watch: How to Reduce Radon

Video: “How to Reduce Radon” by This Old House on YouTube. We didn't make this video; it shows how the work is done. Prices and local rules in it may differ from yours. This is a job for a licensed pro.

How we worked this out

We read the radon mitigation cost guides of HomeGuide (no year shown) and Angi (2025 data), and the CDC's radon page on November 16, 2026, and the EPA's action level page on November 17, 2026. We did not test or fix any homes.

Questions homeowners ask

How much does a radon mitigation system cost?

About $1,200 to $2,000 for sub-slab depressurization, with a national average of $1,600 (HomeGuide). Angi's average is $1,030.

How much does radon testing cost?

A DIY kit costs about $10 to $30, a digital monitor $150 to $300 and a professional test $125 to $400 (HomeGuide).

At what radon level should I mitigate?

The EPA recommends fixing your home at 4 pCi/L or higher and considering a fix between 2 and 4 pCi/L. It says there is no known safe level of radon.

How much does it cost to run a radon fan?

About $70 to $80 a year in electricity (HomeGuide), or $30 to $300 depending on fan size (Angi).

The verdict

Test first: a $10 to $30 kit shows how much radon you have. The EPA recommends fixing the home at 4 pCi/L or higher and considering a fix between 2 and 4, since no level is known to be safe. If you go ahead, a sub-slab system usually costs $1,200 to $2,000 and about $70 to $80 a year to run. Hire a qualified or state-certified contractor through your state radon office, make sure follow-up testing is included, and retest after the work.

Sources We Checked

About the author

Khalid is studying mechanics and works as a welder. He is not a certified radon professional or a health professional. He writes these cost guides by comparing published price data and official safety sources, and he lists every source he used. No brand paid for this guide, and it has no affiliate links. More about Khalid · How we research

Scroll to Top