Sump pump installation cost averages about $1,100, according to Angi, or $1,400 according to This Old House, for a new pump with a pit and drainage. Replacing a pump in a pit you already have is much cheaper: $350 to $1,000 (This Old House), with Angi’s average at $525. The pump type, whether a pit has to be dug and how the water is piped away explain most of the range. This guide compares pedestal, submersible and backup pumps, prices the extras, and includes a calculator for new and replacement jobs.
The short answer
- New install: about $1,100 (Angi, range $800 to $3,000) or $1,400 (This Old House).
- Replacement: $350 to $1,000 in an existing pit (This Old House); Angi’s average is $525.
- Battery backup: adds about $1,000 to $2,000 installed (Angi).
- Lifespan: most pumps last 7 to 10 years (Angi); submersibles 5 to 15, pedestals up to 30 (This Old House).
Sump pump installation cost calculator
Installed prices for new pumps, battery backup, permits and accessories come from Angi; replacement and buried discharge lines from This Old House. A rough estimate, not a quote.
| Pump | |
|---|---|
| Battery backup | |
| Discharge line | |
| Accessories | |
| Permit |
Not included: drilling through concrete for a new pit (This Old House: $2,500 to $5,000), a new electrical circuit, interior drain tile or local price differences. Rounded to the nearest $10.
Sump pump installation cost by type
| Type | Installed (Angi) | Pump only (This Old House) | Lifespan (This Old House) |
|---|---|---|---|
| Pedestal | $800 to $1,500 | $80 to $800 | Up to 30 years |
| Submersible | $1,200 to $3,000 | $90 to $1,000 | 5 to 15 years |
| Battery backup | $1,000 to $2,000 (add-on) | $150 to $250 (backup only) | — |
| Water-powered backup | $1,200 to $2,500 | $200 to $900 | — |
| Combination (primary + backup) | — | $500 to $1,500 | — |
A pedestal pump has its motor above the pit, while a submersible sits in the water. This Old House says pedestal pumps can last up to 30 years and submersibles 5 to 15. Angi says submersibles cost more but are more powerful.
Sump pump replacement cost
If the pit and discharge line are already there, a replacement is mostly the price of the pump plus an hour or so of labor. Angi's average replacement is $525, with most between $309 and $749, and This Old House gives $350 to $1,000. Angi says a replacement takes about an hour and a new installation two to four hours.
- The pump is more than 10 years old (Angi).
- It runs nonstop or keeps cycling on and off (Angi, This Old House).
- It makes unusual noises, shows rust or has water in the motor housing (This Old House).
- Angi notes that major motor repairs can cost close to half the price of a new pump.
Cost to install a sump pump where there is none
A first-time installation means digging a pit and adding a discharge line to carry the water away. This Old House says the pit alone costs $500 to $1,200 in labor, not counting drilling through concrete, which can cost $2,500 to $5,000 by itself. A discharge line costs $150 to $400 above ground or $250 to $2,000 buried (This Old House). A permit may be needed if wiring has to change; Angi prices permits at $50 to $250.
By pump size, Angi prices a 1/3 horsepower pump (up to 2,000 gallons per hour) at $800 to $1,200 installed, a 1/2 HP pump at $1,000 to $1,600, and 3/4 HP or larger at $1,600 to $2,500.
Running costs and upkeep
| Item | Cost (Angi) |
|---|---|
| Electricity | $30 to $50 a year |
| Backup battery replacement | $50 to $150 every few years |
| Professional maintenance | $100 to $300 per visit |
| Switch or float repair | $100 to $300 |
| Smart monitoring | $100 to $500 |
This Old House says keeping gutters, downspouts and outside drainage clear reduces the groundwater that reaches the pit, so the pump runs less.
Water and electricity
Safety points
- The CDC says never to switch power on or off or use electric tools while standing in water. If you would have to wade in to reach the main switch, call an electrician.
- A check valve stops pumped water from flowing back into the pit (This Old House). Make sure your quote includes one.
- After a flood, the EPA says to dry water-damaged areas and items within 24 to 48 hours to prevent mold.
Watch: How to Install a Sump Pump
How we worked this out
We read This Old House's sump pump cost guide (updated March 11, 2026), Angi's installation guide (no date shown) and replacement guide (updated November 22, 2024), the CDC's flood safety page and the EPA's mold guide on November 16, 2026. We did not install any pumps or get quotes.
Questions homeowners ask
How much does it cost to install a sump pump?
About $1,100 on average, with most jobs $800 to $3,000 (Angi). This Old House's average is $1,400 for a new pit with drainage.
How much does sump pump replacement cost?
About $350 to $1,000 in an existing pit (This Old House). Angi's average is $525.
How much does a battery backup sump pump cost?
About $1,000 to $2,000 installed as an add-on (Angi). The backup pump alone costs $150 to $250 (This Old House).
How long does a sump pump last?
Most last 7 to 10 years (Angi). This Old House says submersibles last 5 to 15 years and pedestal pumps up to 30.
The verdict
A new sump pump with a pit usually costs about $1,100 to $1,400, while swapping a worn pump in an existing pit costs $350 to $1,000. Submersibles cost more than pedestal pumps but are more powerful (Angi), and a battery backup ($1,000 to $2,000) keeps the pump working when the power goes out. Test the pump every year and budget for a replacement as it nears the end of its usual life (Angi: 7 to 10 years); replace it sooner if it runs nonstop or fails a test, and keep gutters and downspouts clear so the pump has less to do.