Bay window cost usually runs $2,000 to $6,000 installed, according to HomeGuide, and Angi puts the national average at $2,500. A small box bay can cost under $1,500, while a large bow window or a new bay cut into a flat wall can pass $8,000. This guide compares the main types side by side, explains why adding a bay where there wasn’t one costs much more than replacing an old bay, and gives you a calculator with the extras that are easy to forget.
The short answer
- Typical installed price: $2,000 to $6,000 (HomeGuide); Angi’s average is $2,500, with most jobs at $2,000 to $4,000.
- By type: box bay $800 to $1,500, canted bay $1,800 to $6,000 and bow window $3,000 to $8,000 (HomeGuide).
- Replacing an old bay: $1,800 to $2,500 (HomeGuide). Cutting a new, bigger opening costs more; Angi puts enlarging an opening at about $3,000 on average.
- Easy to miss: a small roof over the bay ($1,800 to $4,600+), a structural engineer (about $550) and the permit.
Bay window cost calculator
A rough estimate, not a quote. Installed prices by type and the roof and permit ranges come from HomeGuide; the structural engineer and haul-away figures from Angi.
| Bay window, installed | |
|---|---|
| Roof over the bay | |
| Structural engineer | |
| Haul-away | |
| Permit |
Not included: drywall, trim and painting inside, a window seat, insulation under the bay, second-floor access (Angi says 5% to 10% more labor) or local price differences. Rounded to the nearest $10.
Bay window cost by type
A bay window is a group of windows that sticks out from the wall. The shape changes both the price and how much space you gain inside.
| Type | What it is | HomeGuide (installed) | This Old House (installed) |
|---|---|---|---|
| Box bay | Square sides at 90 degrees | $800 to $1,500 | $1,125 to $1,350 |
| Canted bay | The classic angled bay, usually three windows | $1,800 to $6,000 | $1,500 to $4,200 |
| Oriel | A bay on an upper floor, supported by brackets | $1,500 to $5,000 | $1,600 to $4,800 |
| Circle bay | A rounded bay of four or more windows | $2,500 to $6,000 | $2,700 to $4,800 |
| Bow window | Four to six windows in a gentle curve | $3,000 to $8,000 | $2,400 to $5,300 |
Bay window replacement cost vs a new bay
Replacing an existing bay is the cheaper job, because the opening, the support and the roof are already there. HomeGuide puts it at $1,800 to $2,500, and Angi's average replacement is $2,500.
Turning a flat window into a bay is a bigger project. The wall opening may need to be cut wider, the bay needs support, and it usually needs a small roof of its own. Angi says enlarging an opening averages about $3,000, and This Old House notes that a new installation can double the cost compared with a replacement. HomeGuide says a new opening takes one to four days, against six hours to two days for swapping a picture window for a bay.
Bay window cost by size and frame
| Size (feet) | Angi average | This Old House (installed) |
|---|---|---|
| 4 × 3 | $1,400 | $700 to $1,800 |
| 5 × 4 | $2,500 | — |
| 6 × 4 | $3,000 | — |
| 6 × 6 | $5,400 | — |
| 6 × 8 | $7,500 | — |
| 10 × 3 | — | $1,500 to $7,000 |
By frame, Angi's averages run from about $2,000 for aluminum and $2,500 for vinyl to $2,800 for wood or composite and $3,200 for fiberglass. In This Old House's 2026 survey, fiberglass (39%) and vinyl (35%) were the most popular frames for bay windows.
Extras that raise bay window cost
- Roof over the bay: $1,800 to $4,600 or more (HomeGuide). A bay that sits under the existing eaves may not need one.
- Structural engineer: about $550 (Angi), and a general contractor for wall changes $250 to $500, if the opening changes.
- Energy-efficient glass: adds 10% to 25% to the materials (HomeGuide).
- Insulation under the bay: $2 to $8 per square foot (HomeGuide).
- Permits: $50 to $200 or more (HomeGuide); Angi gives $50 to $250.
- Upper floors: Angi says second-floor installs cost 5% to 10% more in labor.
Ask for each item as a separate line. A bay window quote that leaves out the roof, the support and the interior finishing can look cheap and end up costing far more.
Walls, permits and older homes
Before anyone cuts the wall
- Widening an opening in an exterior wall can affect the structure. Use a contractor who will get the permit and, where needed, an engineer's sign-off.
- In homes built before 1978, the old window and trim may have lead paint. The EPA says renovation in these homes should be done by a lead-safe certified firm.
- Bays on upper floors need proper support. Don't hang a heavy unit on brackets meant for a light one.
Watch: Installing a New Bay Window
How we worked this out
We read the 2026 bay window cost guides of HomeGuide, Angi and This Old House (updated November 6, 2026) on November 16, 2026 and compared them. The lead paint guidance comes from the EPA. We did not get quotes or install any windows.
Questions homeowners ask
How much does it cost to replace a bay window?
About $1,800 to $2,500 installed, according to HomeGuide, and $2,500 on average according to Angi, when the opening and roof are already in place.
How much more does a bow window cost than a bay?
HomeGuide puts bow windows at $3,000 to $8,000 installed, against $1,800 to $6,000 for a canted bay. Bows use more windows in a curve, so they usually cost more.
Does a bay window need a permit?
Usually, if the wall opening changes. HomeGuide puts permits at $50 to $200 or more. A like-for-like replacement may not need one; ask your building department.
Can I add a window seat?
Yes. It is carpentry on top of the window. HomeGuide lists carpentry such as trim and window seats at $30 to $200 per hour.
The verdict
A bay window usually costs $2,000 to $6,000 installed, and replacing an existing bay is the cheaper job. Adding a new bay to a flat wall can easily double the price once the opening, support, roof and interior finishing are included. Use the calculator for a rough total, then ask for written quotes that list the window, the roof, the structural work and the permit separately.