Garage Door Spring Replacement Cost: Why It’s a Pro Job

Garage door spring replacement cost is usually $150 to $350 with parts and labor, and Angi puts the national average at $250. HomeGuide gives a similar $120 to $350, while This Old House, using Homewyse data, puts the average higher at $420. The springs themselves cost very little: most of the price is a trained technician safely releasing and resetting a part under heavy tension. This guide explains torsion and extension springs, what drives the price, how long springs last and why this is one repair to leave to a pro.

The short answer

  • Typical price: $150 to $350 (Angi, average $250); HomeGuide says $120 to $350.
  • Torsion springs: $140 to $350 installed; extension springs $120 to $200 (HomeGuide).
  • Parts are cheap: a torsion spring costs about $30 to $100 and an extension spring $20 to $50 (HomeGuide). The rest is skilled labor.
  • Safety: don’t open the door or run the opener with a broken spring. Both Angi and HomeGuide warn against doing this repair yourself.

Garage door spring replacement cost calculator

Pick the spring job and how many doors need it. Prices include parts and labor and come from HomeGuide. If you don’t know the spring type: torsion springs sit on a bar above the door; extension springs run along the tracks on each side.

Spring replacement
Cable replacement
Conversion to torsion

Not included: emergency or after-hours fees, heavy wood doors (add $60 to $100 per set, HomeGuide), opener repairs or local price differences. Rounded to the nearest $10.

Row of residential garages with white roll-up doors
Garage door spring replacement cost is mostly labor: the springs themselves cost about $20 to $100 (HomeGuide). Photo: Braeson Holland / Pexels.

Why garage door spring replacement cost estimates differ

$0 $150 $300 $450 $600 HomeGuide Angi This Old House (Homewyse) Bar = typical range · dot = average
Sources: HomeGuide, Angi and This Old House (updated March 10, 2026, Homewyse data). Read on November 16, 2026.

HomeGuide and Angi base their figures on reported project prices, while This Old House uses Homewyse estimates, which run higher. Your local labor rate and whether it is an emergency call matter more than any national average. Ask for a flat price that includes parts, labor and the trip charge before the technician starts.

Garage door spring replacement cost: torsion vs extension

Torsion springsExtension springs
WhereOn a bar above the doorAlong the horizontal tracks
Installed (HomeGuide)$140 to $350$120 to $200
Per spring (Angi)$75 to $150$50 to $100
Installed (This Old House)$350 to $540$300 to $400
Part only (HomeGuide)$30 to $100$20 to $50
Lifespan (HomeGuide)7 to 14 years, 10,000 to 20,000 cycles4 to 10 years, 5,000 to 15,000 cycles

Torsion springs cost a little more but, by HomeGuide's figures, last longer. HomeGuide prices a conversion from extension to torsion at $200 to $500 per door, while Angi gives $400 to $800.

Replace one spring or both?

Angi recommends replacing both springs together to keep the door balanced. Springs on the same door have done the same number of cycles, so the second one may not last much longer. HomeGuide's prices show the second spring adds relatively little: $140 to $270 for one torsion spring against $200 to $350 for two.

If you open and close the door a lot, ask about high-cycle springs. HomeGuide says they cost about $55 to $95 and are rated for about 50,000 cycles. At 10 cycles a day, it says standard springs may fail within three to six years.

Brick garage with wooden doors and a wreath
Heavy wood doors need stronger springs; HomeGuide adds $60 to $100 per set. Photo: Natural Light Visuals / Pexels.

Signs you need garage door spring replacement

  • A visible gap in the coil of a torsion spring above the door.
  • The door feels very heavy, opens only a few inches, or the opener strains and stops.

If you see any of these, stop using the door. HomeGuide warns that running the opener with a broken spring can burn out the motor, damage panels or let the door fall.

Why garage door spring replacement is a pro job

Dangerous to do yourself

  • HomeGuide warns that "these highly pressurized springs come loose with force and can cause serious injuries."
  • Angi says garage doors are very heavy and the springs are under high tension, so DIY replacement is dangerous. Never open a door with a broken spring.
  • The CPSC says doors that are not balanced, or that bind or stick, should be serviced by a professional.
  • This Old House says extension springs need a safety cable through the middle, so a broken spring can't fly loose.

Parts cost only $20 to $100, so it is tempting. However, the money you save is small compared with the risk. A professional also checks the cables, rollers and balance at the same visit.

How we worked this out

We read the 2026 garage door spring replacement cost guides of HomeGuide, Angi and This Old House and the CPSC's garage door safety alert on November 16, 2026. We did not repair any doors or get quotes.

Questions homeowners ask

How much does it cost to replace a garage door spring?

About $150 to $350 with parts and labor, according to Angi (average $250). HomeGuide gives $120 to $350, and This Old House averages $420.

How long do garage door springs last?

HomeGuide gives torsion springs 7 to 14 years (10,000 to 20,000 cycles) and extension springs 4 to 10 years (5,000 to 15,000 cycles).

Can I open my garage door with a broken spring?

No. Angi and This Old House both say not to open a door with a broken spring. It becomes too heavy to lift safely and can fall.

How much does general garage door repair cost?

HomeGuide puts typical garage door repairs at $85 to $350. Spring and cable work together runs about $200 to $500.

The verdict

Garage door spring replacement usually costs $150 to $350, and the parts are a small share of that. Angi recommends replacing both springs at once; consider high-cycle springs if the door is used a lot, and leave the work to a technician. A spring under tension is one of the most dangerous parts of a house to repair yourself.

Sources We Checked

About the author

Khalid is studying mechanics and works as a welder. He is not a garage door technician or a contractor. He writes these cost guides by comparing published price data and official safety sources, and he lists every source he used. No brand paid for this guide, and it has no affiliate links. More about Khalid · How we research

Scroll to Top