Chimney repair cost for most homes falls between about $200 and $1,200, according to HomeGuide, with national averages of $550 (HomeGuide) and $455 (Angi). Small fixes such as sealing a cracked crown or replacing a cap cost a few hundred dollars. A new flue liner or rebuilding the top of the chimney can run into the thousands. This guide matches common problems to the repair they usually need and its price, and explains why a yearly inspection matters for safety.
The short answer
- Typical repair: $200 to $1,200 (HomeGuide); Angi’s common repairs run $160 to $750.
- Small fixes: crown crack sealing $150 to $400, cap $200 to $700, flashing repair $200 to $500 (HomeGuide).
- Big jobs: new liner $1,200 to $4,600, spalling brick repair $1,000 to $3,000, full replacement $4,000 to $15,000 (HomeGuide).
- Safety: the CPSC says to have chimneys, flues and vents inspected by a professional every year.
Chimney problem price finder
Pick up to three problems you or an inspector have found. The tool shows HomeGuide’s national price range for the repair each one usually needs. A rough guide, not a diagnosis or a quote.
| Problem 1 | |
|---|---|
| Problem 2 | |
| Problem 3 | |
| Cleaning and inspection |
Ranges are national figures from HomeGuide. Tall chimneys, steep roofs, stone chimneys and damage found once work starts can raise the price. Rounded to the nearest $10.
Chimney repair cost by type of repair
These are HomeGuide's national ranges, with Angi's figures where it gives them. Prices include labor.
| Repair | HomeGuide | Angi |
|---|---|---|
| Crown crack sealing | $150 to $400 | $150 to $350 |
| New crown | $1,000 to $3,000 | Up to $3,000 |
| Chimney cap | $200 to $700 | About $300 |
| Flashing repair | $200 to $500 | — |
| Flashing replacement | $300 to $1,500 | — |
| Waterproofing sealant | $150 to $400 | $150 to $500 |
| Repointing or tuckpointing | $500 to $2,500 | $500 to $2,500 |
| Spalling brick repair | $1,000 to $3,000 | — |
| Cracked flue tiles | $250 to $1,000 | $200 to $400 for a few tiles |
| New liner | $1,200 to $4,600 | $625 to $7,000 |
| Rebuild a section | $1,000 to $3,500 | $1,000 to $5,000 |
| Full replacement | $4,000 to $15,000 | About $10,000, up to $15,000 |
The pattern is clear: problems caught early, such as a cracked crown or a missing cap, cost hundreds. Once water has worked into the bricks and mortar for years, the bill moves into the thousands.
Chimney crown repair cost
The crown is the concrete or mortar slab on top of a masonry chimney. It sheds rain away from the bricks. HomeGuide puts sealing small cracks at $150 to $400 and resurfacing at $600 to $1,200, while a new crown costs $1,000 to $3,000. Because a small crack lets water into the chimney every time it rains, it is usually worth fixing as soon as an inspector finds it.
Chimney flashing repair cost
Flashing is the metal that seals the gap between the chimney and the roof. When it fails, water shows up on ceilings or walls near the chimney, often far from the actual leak. HomeGuide prices flashing repair at $200 to $500 and full replacement at $300 to $1,500, with stone or masonry chimneys at the top of that range. A cricket, a small peaked section behind wide chimneys that steers water around them, costs $200 to $1,000 to add.
Chimney liner cost
The liner, or flue, carries smoke and gases out of the house. Cracked clay tiles can let heat and gases reach the wood framing. HomeGuide puts cracked flue tile repair at $250 to $1,000 and full relining at $1,200 to $4,600 in its text, while its chart and Angi both stretch to about $7,000 for complex jobs. Ask whether the quote is for a stainless steel liner, a cast-in-place liner or new clay tiles, since they are priced very differently.
Why the yearly inspection matters
Fire and carbon monoxide
- The CPSC says to have a professional inspect all fuel-burning heating systems every year, including chimneys, flues and vents.
- The CPSC warns that fireplaces can spark fires if chimneys are cracked, blocked or coated with creosote.
- Fuel-burning systems, including fireplaces, can produce carbon monoxide, an odorless, colorless and deadly gas. The CPSC says to put CO alarms on every level of the home and outside sleeping areas.
- Don't climb onto the roof to check the chimney yourself. Look from the ground with binoculars and leave the rest to a sweep or mason.
- If smoke spills into the room, stop using the fireplace. If a CO alarm sounds, don't look for the source: get everyone outside and call 911 or the fire department from outside, the CPSC says. Don't use the appliance again until a trained technician has serviced it.
HomeGuide puts a cleaning plus inspection at $150 to $250, and Angi's inspection range is $130 to $380. Compared with a $1,000 crown or a $4,000 liner, it is cheap insurance.
Repair or rebuild?
HomeGuide gives $1,000 to $3,500 to rebuild crumbling brick or reface a chimney, and $4,000 to $15,000 for a full replacement. Angi says rebuilding the stack averages about $150 per linear foot. A rebuild usually makes sense when bricks are crumbling across large areas, the chimney leans, or repeated repairs keep failing. If you no longer use the fireplace, HomeGuide lists stack removal at $800 to $2,000 as another option.
Watch: How to Make Common Chimney Repairs
How we worked this out
We read the 2026 chimney repair cost guides of HomeGuide and Angi and the CPSC's 2026 winter safety advice on November 16, 2026. The price finder uses HomeGuide's ranges because they cover the most repair types. We did not inspect any chimneys or get quotes.
Questions homeowners ask
How much does it cost to fix a leaking chimney?
Most chimney leaks come from the flashing, the crown or porous brick. HomeGuide puts leak repair and sealing at $150 to $400, flashing repair at $200 to $500 and crown crack sealing at $150 to $400.
How much does a chimney liner cost?
About $1,200 to $4,600 for relining, according to HomeGuide's text, and up to about $7,000 for complex jobs (HomeGuide's chart and Angi).
Does homeowners insurance cover chimney repair?
It depends on the cause. Sudden damage from a storm or lightning may be covered; wear and tear usually is not. Ask your insurer before you hire anyone.
How often should a chimney be inspected?
Every year, according to both the CPSC and Angi. Angi adds that you should clean it more often if you use the fireplace a lot.
The verdict
Most chimney repairs cost $200 to $1,200, and the cheapest ones are the problems caught early. A yearly cleaning and inspection, about $150 to $250, finds cracked crowns, failing flashing and damaged flue tiles before water and heat turn them into a $4,000 job. Use the price finder for a rough range, and ask for a written report with photos before agreeing to big work like relining or a rebuild.