Furnace Repair Cost: Common Problems and Prices

Furnace repair cost for most homes is about $125 to $500, with national averages of $300 (HomeGuide) and $317 (Angi). Small parts such as an igniter or flame sensor cost a few hundred dollars to replace, while a blower motor, an inducer motor or a heat exchanger can run into the thousands. This guide lists the common repairs and their prices, explains what emergency calls add, and shows when it makes more sense to put the money toward a new furnace.

The short answer

  • Typical repair: $125 to $480 (HomeGuide, average $300); Angi says $132 to $502 (average $317).
  • Labor: about $75 to $150 an hour, and $140 to $210 for nights, weekends and holidays (HomeGuide).
  • Expensive repairs: blower motor $300 to $900, inducer motor $400 to $1,100, heat exchanger $1,000 to $3,000 (HomeGuide).
  • Cheap prevention: a yearly tune-up costs about $70 to $200, and the CPSC recommends a yearly professional inspection.

Furnace repair price finder

Pick the part a technician says needs replacing, or the closest match to what you see. Prices include parts and labor and come from HomeGuide. Only a technician can confirm which part has failed.

Repair 1
Repair 2
Tune-up

Not included: emergency or after-hours rates ($140 to $210 an hour, HomeGuide), minimum call-out charges or local price differences. Rounded to the nearest $10.

Hand adjusting a heating thermostat valve
A thermostat problem is one of the cheaper furnace repairs, at about $190 to $480 (HomeGuide). Photo: BOOM Photography / Pexels.

Furnace repair cost by part

RepairHomeGuideAngi
Igniter$100 to $250$150 to $250
Flame sensor$80 to $250$150 to $250
Thermocouple$100 to $300—
Blower motor capacitor$100 to $250—
Blower motor$300 to $900Repair $150 to $450; replace up to $2,000
Draft inducer motor$400 to $1,100$200 to $1,500
Control board$300 to $650$200 to $600
Gas valve$200 to $800$200 to $600
Limit switch$100 to $375$150 to $300
Thermostat$190 to $480$100 to $600
Heat exchanger$1,000 to $3,000Replace $500 to $1,500
$0 $1k $2k $3k $4k Flame sensor Igniter Thermostat Control board Blower motor Draft inducer motor Heat exchanger Bar = parts and labor range
Source: HomeGuide furnace repair cost guide (2026). Read on November 16, 2026.

Furnace blower motor replacement cost

The blower moves warm air through the ducts. HomeGuide puts a new blower motor at $300 to $900 with labor, and a blower capacitor, the small part that helps the motor start, at $100 to $250. Angi gives $150 to $450 for repairs and up to $2,000 to replace a variable-speed motor. Ask the technician whether the capacitor has been tested before you pay for a whole motor.

Furnace heat exchanger replacement cost

The heat exchanger keeps burning gas separate from the air you breathe. HomeGuide prices replacement at $1,000 to $3,000 and says heat exchangers are usually replaced rather than repaired, because a crack can leak carbon monoxide. Angi gives a lower $500 to $1,500 for the part replacement.

On an older furnace, this repair often tips the balance toward a new unit. HomeGuide puts a new furnace at about $2,000 to $5,400 installed. Before paying, ask whether the part is still under the manufacturer's warranty.

Technician kneeling to do a furnace repair
HomeGuide puts most furnace repair labor at $75 to $150 an hour. Photo: José Andrés Pacheco Cortes / Pexels.

Labor, emergency calls and tune-ups

  • Regular hours: $75 to $150 an hour plus parts (HomeGuide); Angi says $50 to $150, often with a $100 to $200 minimum for small jobs.
  • Nights, weekends and holidays: $140 to $210 an hour (HomeGuide). Angi puts emergency repairs at about $300 to $1,200 in total.
  • Tune-up: $70 to $200 (HomeGuide); Angi gives $80 to $100 for an inspection and $125 to $200 with cleaning.
  • Maintenance plan: $150 to $450 a year (HomeGuide).

A tune-up in early fall is cheaper than an emergency call on the first cold night, and it is when a technician can catch a weak igniter or a dirty flame sensor.

When furnace repair cost isn't worth it

HomeGuide says most heating repairs cost $100 to $600, against about $2,000 to $5,400 for a new furnace. It suggests replacing a furnace that needs frequent repairs or is more than 20 years old. HomeGuide's furnace replacement guide adds a second rule: replace when a repair costs more than half the price of a new unit. For a fuller check, see our guide to furnace replacement cost and its repair-or-replace checker.

Safety: gas and carbon monoxide

Before you touch the furnace

  • If you smell gas, leave the house and call the gas company or 911 from outside. Don't flip switches.
  • The CPSC warns that fuel-burning appliances, including furnaces, can produce carbon monoxide. It recommends CO alarms on every level of the home and outside sleeping areas.
  • The CPSC also recommends having fuel-burning heating systems inspected by a professional every year.
  • Changing the filter is a safe DIY job. Gas valves, burners, heat exchangers and wiring are not.
  • If a CO alarm sounds, don't look for the source: get everyone outside and call 911 or the fire department from outside, the CPSC says. Don't use the appliance again until a trained technician has serviced it.

Watch: Why is Furnace Maintenance Important?

Video: “Why is Furnace Maintenance Important?” by This Old House on YouTube. We didn't make this video; it shows how the work is done. Prices and local rules in it may differ from yours.

How we worked this out

We read the 2026 furnace repair cost guides of HomeGuide and Angi and the CPSC's 2026 winter heating safety advice on November 16, 2026. The symptom hints in the price finder are simple common examples, not a diagnosis. We did not repair any furnaces or get quotes.

Questions homeowners ask

How much does a typical furnace repair cost?

About $125 to $480, with a national average of $300 (HomeGuide). Angi's average is $317.

How much does it cost to replace a furnace blower motor?

About $300 to $900 with labor, according to HomeGuide. Angi says replacement can reach $2,000 for some motors.

Is a cracked heat exchanger worth fixing?

HomeGuide says heat exchangers are usually replaced rather than repaired, at $1,000 to $3,000. On a furnace that is 15 or more years old, many homeowners put that money toward a new unit instead.

How often should a furnace be serviced?

Once a year. The CPSC recommends a yearly professional inspection of fuel-burning heating systems, and HomeGuide prices a tune-up at $70 to $200.

The verdict

Most furnace repairs cost $125 to $500, and the common ones, such as igniters and flame sensors, are usually worth doing. Blower motors, inducer motors and especially heat exchangers are where the decision gets harder on an older furnace. Book a yearly tune-up, keep CO alarms working, and get a second quote for any repair over $1,000.

Sources We Checked

About the author

Khalid is studying mechanics and works as a welder. He is not an HVAC technician or a contractor. He writes these cost guides by comparing published price data and official safety sources, and he lists every source he used. No brand paid for this guide, and it has no affiliate links. More about Khalid · How we research

Scroll to Top