The cost to replace an electrical panel averages about $1,475, according to HomeGuide, with This Old House putting a typical 200-amp upgrade at $1,300 to $3,000. Upgrading from 100 to 200 amps runs $1,300 to $1,600 by HomeGuide’s figures, and going to 400 amps $2,000 to $4,000. Many people look at this before adding an EV charger, a heat pump or other big electric loads. This guide prices panels by amperage, covers subpanels, fuse boxes and permits, lists the warning signs, and includes a quick check of whether you need more amps.
The short answer
- Average: $1,475 (HomeGuide), $2,150 (This Old House), $1,300 (HomeAdvisor).
- 100 to 200 amps: $1,300 to $1,600 (HomeGuide); $1,300 to $3,000 for a 200-amp upgrade (This Old House).
- 200 to 400 amps: $2,000 to $4,000 (HomeGuide, This Old House).
- Unsafe brands: Federal Pacific and Zinsco panels should be replaced entirely, HomeGuide says.
Do you need a new panel or more amps?
Answer five questions. The warning signs and brands come from HomeGuide, This Old House and HomeAdvisor; the scoring is our own. Only a licensed electrician can tell you what your panel can safely handle.
Panel work needs a licensed electrician, a permit and an inspection. HomeGuide says never to skip the permit, and HomeAdvisor strongly advises against DIY panel work.
Cost to replace electrical panel by amperage
| Panel | This Old House (panel + install) | HomeAdvisor | Panel only (This Old House) |
|---|---|---|---|
| 100 amp | $800 to $1,500 | $500 to $1,500 | $100 to $200 |
| 150 amp | — | $500 to $1,750 | — |
| 200 amp | $1,300 to $3,000 | $750 to $2,000 | $250 to $350 |
| 300 amp | $1,800 to $3,500 | — | $350 to $500 |
| 400 amp | $2,000 to $4,000 | $1,500 to $4,000 | $500 or more |
The panel itself is a small part of the bill. This Old House says labor is often the biggest cost, and HomeGuide puts a panel replacement at 8 to 10 hours of work. HomeAdvisor's figures are older (updated July 2022), which may explain its lower ranges.
Electrical panel upgrade cost: 100 to 200 amp and beyond
| Upgrade | HomeGuide |
|---|---|
| 60 to 100 amps | $850 to $1,100 |
| 100 to 200 amps | $1,300 to $1,600 |
| 200 to 400 amps | $2,000 to $4,000 |
| New 200-amp panel where there was none | $1,800 to $2,500 |
This Old House notes that replacing a panel with the same size is usually cheaper than upgrading, but the savings are often small because the labor is similar. A bigger upgrade can also mean work on the meter or the service cable from the street: HomeAdvisor prices a new service entrance cable at $1,000 to $1,500 overhead and $5,000 or more underground.
Breaker boxes, subpanels and other costs to replace an electrical panel
- Fuse box to breaker panel: $1,100 to $4,000 (HomeGuide); HomeAdvisor says $1,500 to $2,000, or up to $4,500 with rewiring.
- Federal Pacific or Zinsco replacement: $1,500 to $4,000, including some wiring upgrades (HomeAdvisor).
- Subpanel: $500 to $1,000 (HomeGuide) or $400 to $1,750 (This Old House, HomeAdvisor).
- Single breaker: $150 to $200 installed (HomeGuide); main breaker $200 to $300, or $500 to $2,000 if the bus bar is damaged (This Old House).
- Moving the panel: $800 to $3,000 (This Old House) or $1,000 to $4,000 (HomeGuide).
- Permit: $50 to $300 (This Old House).
Warning signs your panel needs attention
Signs listed by HomeGuide, This Old House and HomeAdvisor
- Breakers that trip often, or lights that flicker or dim when appliances run.
- A panel that feels warm, smells, buzzes or crackles, or shows corrosion or damage.
- Blackened outlets or heavy reliance on power strips.
- A fuse box, service under 100 amps, or a panel 30 or more years old.
- A Federal Pacific Electric (FPE) or Zinsco panel. HomeGuide calls them a high fire risk, and HomeAdvisor adds Challenger and Pushmatic panels had similar problems.
- A burning smell, smoke or sparks is an emergency: stay away from the panel, call 911 if there is smoke or fire, and call an electrician right away (NFPA).
A warm, smelly or buzzing panel is a reason to call an electrician promptly, not to wait for a convenient time.
Tax credits, permits and the cost to replace an electrical panel
Older guides may mention a federal tax credit for panel upgrades under the energy efficient home improvement credit (25C). The IRS says that credit doesn't apply to property placed in service after December 31, 2025, so don't count on it for work done now. Some utilities and states run their own programs, so ask your utility.
Whatever the size, the work needs a licensed electrician and usually a permit. HomeAdvisor says permits are usually required to upgrade or move a panel, increase amperage or add a subpanel.
Watch: How to Upgrade an Electrical Panel to 200-Amp Service (Part 2)
How we worked this out
We read HomeGuide's electrical panel guide (no year shown), This Old House's panel upgrade guide (updated March 31, 2026), HomeAdvisor's panel upgrade guide (updated July 6, 2022) and the IRS's FAQ on the 2025 changes to energy credits on November 16, 2026. The amps checker is our own scoring of the signs those guides list. We did not do any electrical work or get quotes.
Questions homeowners ask
How much does it cost to replace an electrical panel?
About $1,475 on average (HomeGuide), with most homeowners spending $1,287 to $1,707. This Old House's average is $2,150.
How much does a 200 amp panel upgrade cost?
About $1,300 to $1,600 from 100 amps (HomeGuide), or $1,300 to $3,000 for a 200-amp upgrade (This Old House).
How much does a breaker box replacement cost?
Replacing a fuse box with a breaker panel costs $1,100 to $4,000 (HomeGuide). A single breaker costs $150 to $200 installed.
Do I need a bigger panel for an EV charger?
Not always. It depends on your current service and other loads. Ask an electrician to check the panel's capacity before buying a charger; see our EV charger installation cost guide.
The verdict
Replacing an electrical panel usually costs about $1,300 to $2,150, and a 100-to-200-amp upgrade $1,300 to $3,000. Replace Federal Pacific or Zinsco panels, fuse boxes and any panel that is warm, smells or buzzes without delay. If you're only planning new appliances, have an electrician check your capacity first: you may not need an upgrade at all. Always use a licensed electrician and pull a permit.
Sources We Checked
- HomeGuide: How Much Does It Cost to Upgrade or Replace an Electrical Panel?
- This Old House: Cost to Upgrade an Electrical Panel (updated March 31, 2026)
- HomeAdvisor: How Much Does It Cost to Upgrade an Electrical Panel? (updated July 6, 2022)
- IRS: FAQs on changes to energy credits under Public Law 119-21
- NFPA: Electrical Safety tip sheet (hosted by the San Francisco Fire Department)