Mini split installation cost for a single room usually runs about $2,000 to $6,000, and a whole-home system with five indoor units can cost $9,000 to $16,500. Fixr puts the national average for a ductless heat pump at $4,400. The number of zones is the biggest factor: each extra indoor unit adds roughly $2,000 to $3,000. This guide breaks down prices by zones and size, explains the electrical work that is easy to miss, and includes a calculator to estimate your own system.
The short answer
- One zone: $2,000 to $5,000 (Fixr) or $2,500 to $6,000 (HomeGuide) installed.
- More zones: each extra zone adds about $2,000 to $3,000 (Fixr). Five zones run $9,000 to $16,500.
- Extras: permits $250 to $400 and, if needed, a 200-amp electrical upgrade at $1,300 to $3,000 (Fixr).
- Lifespan: 15 to 20 years with maintenance, according to Fixr.
Mini split installation cost calculator
Count one zone for each indoor unit (usually one per room or open area). Installed prices by zone come from Fixr, as do the permit, removal and electrical figures. A rough estimate, not a quote.
| Mini split system, installed | |
|---|---|
| Electrical work | |
| Permit | |
| Old unit removal |
Not included: long line-set runs, a concrete pad, upper-floor access, ceiling or concealed-duct indoor units, or local price differences. Rounded to the nearest $100.
Mini split installation cost by number of zones
| Zones | Fixr | HomeGuide |
|---|---|---|
| 1 | $2,000 to $5,000 | $2,500 to $6,000 |
| 2 | $3,000 to $8,000 | $4,500 to $8,000 |
| 3 | $5,000 to $11,000 | $6,500 to $11,000 |
| 4 | $7,000 to $14,000 | — |
| 5 | $9,000 to $16,500 | $10,000 to $15,000 |
Angi's figures are similar: about $2,000 to $3,000 for a basic single-room system, around $4,000 for a mid-range one and more than $6,000 for top systems, up to $14,500.
Ductless mini split cost by size
Mini splits are sized in BTUs. Angi's rule of thumb is one ton (12,000 BTU) for every 500 to 600 square feet. HomeGuide's installed prices by size:
| Size | Installed (HomeGuide) |
|---|---|
| 9,000 BTU (0.75 ton) | $3,000 to $4,200 |
| 12,000 BTU (1 ton) | $3,500 to $5,000 |
| 18,000 BTU (1.5 tons) | $4,500 to $6,500 |
| 24,000 BTU (2 tons) | $6,000 to $8,000 |
| 36,000 BTU (3 tons) | $8,000 to $11,000 |
Indoor unit styles
| Indoor unit (single zone) | Installed (HomeGuide) |
|---|---|
| Wall-mounted | $2,500 to $5,000 |
| Floor-mounted | $3,000 to $5,000 |
| Ceiling cassette | $3,500 to $6,000 |
| Concealed duct | $4,000 to $7,500 |
Wall units are the cheapest option. Ceiling cassettes and concealed-duct units look tidier but need more installation work.
Electrical work that raises mini split installation cost
Every mini split needs a dedicated circuit. Angi lists that at about $250 extra, with electricians at $50 to $100 an hour. If the panel has no free breaker spaces, Fixr prices a subpanel at $400 to $2,000; a subpanel adds room for circuits, not capacity. If the house's service is too small for the new load, a 200-amp service upgrade costs $1,300 to $3,000. Ask the installer to check your panel before you compare quotes, because this is where surprises show up.
Mini split vs central air
Angi puts central air at about $3,800 to $7,500 when ducts are already in place. For a house without ducts, a mini split avoids the cost of adding them: HomeGuide prices new ductwork at $2,400 to $6,600. So for one or two rooms, such as an addition or a garage conversion, a single-zone mini split is usually the cheaper route. On the other hand, central air often costs less for a whole house with good ducts.
Refrigerant, permits and tax credits
Installation is a pro job
- The EPA says homeowners should work with dealers whose technicians are EPA-certified to handle refrigerants.
- HomeGuide says DIY installation is not recommended. The job includes a high-voltage circuit, a hole through the wall and a sealed refrigerant line.
- Fixr puts permits at $250 to $400. Ask the installer to pull the permit.
Some cost guides still mention federal tax credits for heat pumps. The IRS says the 25C credit does not apply to property placed in service after December 31, 2025, so check your state and utility for rebates instead.
Watch: How to Install a Wall-Mounted Mini-Split
How we worked this out
We read the 2026 mini split cost guides of HomeGuide, Fixr and Angi, the EPA's refrigerant guidance and the IRS credit changes on November 16, 2026. We did not install any equipment or get quotes.
Questions homeowners ask
How much does it cost to install a one-zone mini split?
About $2,000 to $5,000 (Fixr) or $2,500 to $6,000 (HomeGuide), including installation. Angi says a basic single-room system starts at about $2,000 to $3,000.
How much does each extra zone cost?
About $2,000 to $3,000, according to Fixr. Angi prices extra indoor units at $400 to $1,800 for the equipment.
How long does a mini split last?
About 15 to 20 years with proper maintenance, and up to 30 years for some models, according to Fixr.
Is a mini split cheaper than central air?
For one or two rooms or a house without ducts, usually yes. For a whole house that already has good ducts, central air (about $3,800 to $7,500, Angi) is often cheaper.
The verdict
A mini split usually costs $2,000 to $6,000 for one room and $9,000 to $16,500 for five zones. It makes the most sense for houses without ducts, additions and problem rooms. Check your electrical panel early, use an EPA-certified installer who pulls the permit, and compare quotes for the same number of zones and the same indoor unit styles.
Sources We Checked
- Fixr: Ductless Heat Pump Cost in 2026 (updated January 29, 2026)
- HomeGuide: How Much Does a Mini Split Installation Cost? (2026)
- Angi: How Much Does It Cost to Install a Mini-Split? (2026 data)
- HomeGuide: How Much Does AC Replacement Cost? (2026), for ductwork
- EPA: Purchasing and Repairing Home Air-Conditioners or Heat Pumps
- IRS: FAQs on the changes to sections 25C, 25D and other energy credits (2025 law)